Precision laser-cut cardboard kit....
Check not just if your track has power - but also how much!Lights illuminate for 5-9V, 9-12V and +12V.Analogue DC or DCC compatible.Works on all N, HO, OO, S, TT track systems.Shows polarity.
2 paires of right angle magnetic clamps and 2 pairs of magnetic clamps with adjustable angles. Simply pull apart, place inside and outside your corners and snap into place. The snap and glue pairs hold the two pieces of plastic, wood, etc. in place and allow you to glue them at the desired angle without further worry. After curing of the adhesive do...
For all HO and OO tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks...
A set of paired magnetic set squares. Simply pull apart, place inside and outside your 90 degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily the Snap & Glue angle magnets.
Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails.
Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails.
Adjustable height setting allows you to alter the depth of ballast and cope with different Code Rail. Shut off valve - now you can halt the flow of ballast whilst you lift the Ballast Spreader over point work or when it reaches the end of the track. Loco hauled - You can now pull the Ballast Spreader with a locomotive as well as by hand.
Our classic ballast spreader with a shut off mechanism added.
A set of paired magnetic clamps with adjustable angles. Simply pull apart, place inside and outside your corners and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the desired angle without further worry. After curing of the adhesive do remove easily the Snap & Glue magnetic clamps.
Specifications: Board Size: 220 X 163 mm Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades. Cutting height: Up to 8 mm depending on the width and hardness of timber or profile. Cutting width: Up to 30 mm depending of the height and hardness of timber or profile. Materials to cut: Soft woods, styrene, plastics. TC-105 Cutter uses...
Proses hold and glue right angle holders for kit buildings and modellers. Pack contains 2 holders, simply pull apart, place inside and outside your 90 degree corner and fix the wing nuts.
Another great tool to end your challenges to get your long, multi wheel locos on tracks with ease. The aluminum base is powered by the track it is placed on and lets the loco run and get on the track smoothly and properly. Both ends are open to giving access to both sides of the track. Base length: 48 cm Scale: HO/OOClick below for other scales.Z...
Inner track radius (R3): 505 mm. (Hornby R608 / R609 or Peco Setrack ST-230 / ST-231) Tracks not included. Outer track radius (R4): 572 mm. (Hornby R8261 / R8262 or Peco Setrack ST-235) Tracks not included. Width of track beds: 13.5 cm Levels: 2.5 Total height to climb: 30 cm Vertical distance between levels: 10 cm Grade: 2.96% Total track length: 8.4...
Inner track radius (R3): 505 mm. (Hornby R608 / R609 or Peco Setrack ST-230 / ST-231) Tracks not included. Outer track radius (R4): 572 mm. (Hornby R8261 / R8262 or Peco Setrack ST-235) Tracks not included. Width of rings: 13.5 cm Levels: 3.5 Total height to climb: 40 cm Vertical distance between levels: 10 cm Grade: 2.96% Total track length: 11.7 meters....
Inner track radius (R3): 505 mm. (Hornby R608 / R609 or Peco Setrack ST-230 / ST-231) Tracks not included. Outer track radius (R4): 572 mm. (Hornby R8261 / R8262 or Peco Setrack ST-235) Tracks not included. Width of track beds: 13.5 cm Levels: 4.5 Total height to climb: 48 cm Vertical distance between levels: 10 cm Grade: 2.96% Total track length: 15...
Tire truer and cleaner for 1:32 and 1:24 scale slot cars. Adapter, coarse and fine sandpapers, and spare cleaning felts included. Track Tester, not only allows to check if there is voltage on the track if not how much.
3D Embossed Cobblestone Road Set N scale, 1.5 meters, 4.92 ft.)Embossed printed on 1 mm thick foam PVC material. They can be cut with a maquette knife or scissors easily. Printed with waterproof, fade-proof UV paints.
3D Embossed Cobblestone Road Set N scale, 1.6 meters, 5.25 ft.Embossed printed on 1 mm thick foam PVC. They can be cut with a maquette knife or scissors easily. Printed with waterproof, fade-proof UV paints.
3D Embossed Cobblestone Road Set (HO scale, 3 meters, 9.8 ft.)Embossed printed on 1 mm thick foam PVC material. They can be cut with a maquette knife or scissors easily. Printed with waterproof, fade-proof UV paints. Total Length: 3 meters, 9.8 ft.
Fully modular and up-gradable MDF helix system. It can be assembled and disassembled in less than 2 hours, which enables you to move or change your layout and modify your helix with ease. Very strong despite being modular. A dedicated spacer to adjust vertical distance between rings is included. Please see the pictures for specifications and manual....
Fully modular and up-gradable MDF helix system. It can be assembled and disassembled in less than 2 hours, which enables you to move or change your layout and modify your helix with ease. Very strong despite being modular. A dedicated spacer to adjust vertical distance between rings is included. Please see the pictures for specifications and manual....
Fully modular and up-gradable MDF helix system. It can be assembled and disassembled in less than 2 hours, which enables you to move or change your layout and modify your helix with ease. Very strong despite being modular. A dedicated spacer to adjust vertical distance between rings is included. Please see the pictures for specifications and manual....
Fully modular and up-gradable MDF helix system. It can be assembled and disassembled in less than 2 hours, which enables you to move or change your layout and modify your helix with ease. Very strong despite being modular. A dedicated spacer to adjust vertical distance between rings is included. Please see the pictures for specifications and manual....
3D Embossed Cobblestone Road Set HO/OO scale, 3.2 meters, 10.5 ft.Embossed printed on 1 mm thick foam PVC material. They can be cut with a maquette knife or scissors easily. Printed with waterproof, fade-proof UV paints. Total Length: 3.2 meters, 10.5 ft.
Precision laser-cut cardboard kit. See specifications below.
Precision laser-cut cardboard kit. See specifications below.
Precision laser-cut cardboard kit. See specifications below.
Service your loco simply and easy with this new loco cradle. Will support your loco at 45, 90 degrees or completely upside down.Unique rubber beds keep the loco held in the bench without damage.
Laser-cut cardboards kit of historical village station of Cigli in Turkey. Fits to all HO and OO scale layouts.
Laser-cut authentic wood kit. Real HO Tracks included. Length: 142 mm Width: 33 mm Height: 25 mm
Laser-cut authentic wood kit. Length: 130 mm Width: 33 mm Height: 29 mm