Smart Tools and Accessories For Model Railroaders and Hobbyists There are 20 products.

Showing 1 - 20 of 20 items
  • € 16.00 In Stock

    Check not just if your track has power - but also how much!Lights illuminate for 5-9V, 9-12V and +12V.Analogue DC or DCC compatible.Works on all N, HO, OO, S, TT track systems.Shows polarity.

    € 16.00
    In Stock
  • € 90.00 In Stock

    Specifications: Overall size: 225 X 165 X 65m Power adapter input voltage: 100/240 V Power adapter output voltage: 18-20V DC, 3A Cutting disk size: 38mm Cutting height: 5mm Materials to cut: Model train tracks, non-ferrous soft metals. Includes and additional security switch to stop the motor when the arm is raised above 20mm. Package Includes: Track...

    € 90.00
    In Stock
  • € 55.00 In Stock

    Specifications: Board Size: 220 X 163 mm Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades. Cutting height: Up to 8 mm depending on the width and hardness of timber or profile. Cutting width: Up to 30 mm depending of the height and hardness of timber or profile. Materials to cut: Soft woods, styrene, plastics. TC-105 Cutter uses...

    € 55.00
    In Stock
  • € 2.00 In Stock

    5 spare felts for Proses Track Cleaner Proses Track Cleaner is a simple yet easy and efficient hand tool for keeping your  track rails clean and helps improve the pickup around the layout.

    € 2.00
    In Stock
  • € 7.00 In Stock

    Proses track cleaner with 2 additional spare felts. Simple and easy hand tool for keeping your  track rails clean and helps improve the pickup around the layout.

    € 7.00
    In Stock
  • € 20.00 In Stock
    New

    Another great tool to end your challenges to get your long, multi-wheel locos on tracks with ease. The base is powered by the track it is placed on and lets the loco run and get on the track smoothly and properly. Base length: 20 cm Scale: ZClick below for other scales.Z Scale Railer € 20.00N Scale Railer € 27.00HO/OO Scale Railer € 35.00HO...

    € 20.00
    In Stock
  • € 27.00 In Stock

    Another great tool to end your challenges to get your long, multi wheel locos on tracks with ease. The aluminum base is powered by the track it is placed on and lets the loco run and get on the track smoothly and properly. Base length: 23 cm Scale: NClick below for other scales.Z Scale Railer € 20.00N Scale Railer € 27.00HO/OO Scale Railer €...

    € 27.00
    In Stock
  • € 55.00 In Stock
    New

    A set of 4 pcs large scale magnetic set squares. Simply pull apart, place inside and outside your 90-degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily the Snap & Glue angle magnets....

    € 55.00
    In Stock
  • € 35.00 In Stock
    New

    A set of 2 pcs large scale magnetic set squares. Simply pull apart, place inside and outside your 90-degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily the Snap & Glue angle magnets....

    € 35.00
    In Stock
  • € 42.00 In Stock

    2 paires of right angle magnetic clamps and 2 pairs of magnetic clamps with adjustable angles. Simply pull apart, place inside and outside your corners and snap into place. The snap and glue pairs hold the two pieces of plastic, wood, etc. in place and allow you to glue them at the desired angle without further worry. After curing of the adhesive do...

    € 42.00
    In Stock
  • € 25.00 In Stock

    A set of paired magnetic clamps with adjustable angles. Simply pull apart, place inside and outside your corners and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the desired angle without further worry. After curing of the adhesive do remove easily the Snap & Glue magnetic clamps.

    € 25.00
    In Stock
  • € 16.00 In Stock

    Proses hold and glue right angle holders for kit buildings and modellers. Pack contains 2 holders, simply pull apart, place inside and outside your 90 degree corner and fix the wing nuts.

    € 16.00
    In Stock
  • € 22.00 In Stock

    A set of paired magnetic set squares. Simply pull apart, place inside and outside your 90 degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily the Snap & Glue angle magnets.

    € 22.00
    In Stock
  • € 35.00 In Stock

    A set of paired magnetic set squares. Simply pull apart, place inside and outside your 90 degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily the Snap & Glue angle magnets.

    € 35.00
    In Stock
  • € 25.00 In Stock
    New

    Your customized desktop name plate with your name, club name, road name, etc. Height: 10 cm (4")  Ships in 3 days. Please email your name or club name after purchase or add it on the comments section on check out pages.

    € 25.00
    In Stock
  • € 12.00 In Stock

    Laser- cut letters for your buildings, advertisements on roofs, etc. for all scales. 1 Set includes more than 160 letters and numbers. Height: 7.5mm.

    € 12.00
    In Stock
  • € 9.95 In Stock

    Laser- cut letters for your buildings, advertisements on roofs, etc. for all scales. 1 Set includes more than 160 letters and numbers. Height: 5mm.

    € 9.95
    In Stock
  • € 13.50 In Stock

    Laser- cut letters for your buildings, advertisements on roofs, etc. for all scales. 1 Set includes more than 160 letters and numbers. Height: 10mm.

    € 13.50
    In Stock
  • € 13.00 In Stock

    ●Proses G-01 Glue is a condensed, water based, odorousless, easy to use and non-toxic glue. You can dilute with 4/7 parts of water to make up to 2 lts (68 fl oz) of ballasting glue.   ●When diluted, it can be sprayed on ballast, applied using an eye dropper, or best, using an appropriate scale Proses Ballast Glue Applicator.   ●Proses G-01 Glue is also an...

    € 13.00
    In Stock
  • € 29.95 In Stock
    New

    Your customized wall clock with your name or club name. Size: 17.5 cm X 18.5 cm (6.89" X 728")  Works with a 1.5V AA battery. (Not included) Ships in 3 days. Please email your name or club name after purchase or add it on the comments section on check out pages.

    € 29.95
    In Stock
Showing 1 - 20 of 20 items