Precision laser-cut cardboard kit....
Check not just if your track has power - but also how much!Lights illuminate for 5-9V, 9-12V and +12V.Analogue and digital compatible.Works on all Marklin, 3-Rail track systems.
Specifications: Cutting disk size: 38 mm Cutting disc thickness: 1 mm Materials to cut: Model train tracks, non-ferrous soft metals. The package includes 10 discs.
Specifications: Overall size: 225 X 165 X 65m Power adapter input voltage: 100/240 V Power adapter output voltage: 18-20V DC, 3A Cutting disk size: 38mm Cutting height: 5mm Materials to cut: Model train tracks, non-ferrous soft metals. Includes and additional security switch to stop the motor when the arm is raised above 20mm. Package Includes: Track...
Specifications: Board Size: 220 X 163 mm Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades. Cutting height: Up to 8 mm depending on the width and hardness of timber or profile. Cutting width: Up to 30 mm depending of the height and hardness of timber or profile. Materials to cut: Soft woods, styrene, plastics. TC-105 Cutter uses...
For all analog or digital locomotives. Includes 6 rollers and 4 cleaners. Suitable for Marklin 3-Rail, analog and digital locomotives.
For all analog or digital locomotives running on 3-Rail, Marklin tracks.
This rolling road features an additional HO (3-Rail) aluminum track which can help support steam locomotive tenders while in the road unit. With protective buffers at each end the rolling road is suitable for all HO and OO scale models and can acommodate locomotives up to 500mm long. Included are 6 indiviual rollers in conjuction with 4 cleaning units,...
Another great tool to end your challenges to get your long, multi-wheel locos on tracks with ease. The aluminum base is powered by the track it is placed on and lets the loco run and get on the track smoothly and properly. Base length: 48 cm Scale: HO (3-Rail, for all Marklin tracks.)Click below for other scales.Z Scale Railer € 20.00N Scale...
Another great tool to end your challenges to get your long, multi-wheel locos on tracks with ease. The aluminum base is powered by the track it is placed on and lets the loco run and get on the track smoothly and properly. Base length: 48 cm Scale: HO (3-Rail, for all Marklin tracks.)Click below for other scales.Z Scale Railer € 20.00N Scale...
This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin K-Tracks. One set includes 2 Parallel Track Tools.
This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin C-Tracks. One set includes 2 Parallel Track Tools.
For all HO and OO tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks...
A set of paired magnetic set squares. Simply pull apart, place inside and outside your 90 degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily the Snap & Glue angle magnets.
Access all areas of your Loco with this new mechanical loco cradle. Adjustable for the length of your loco.Holds and rotates your model with ease.Unique rubber beds keep the loco held in the bench without damage.
Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails. Fits to Marklin 3-rail tracks.