A set of paired magnetic set squares. Simply pull apart, place inside and outside your 90 degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily the Snap...

For O Scale (32 mm / 1 1/4") Track Gauges and 3 Rail Tracks Lay meters of ballast in just a few minutes! Perfect ballast spreading is never problem again with this easy to use tool. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails. Works perfect on straights and curves. You can use on all O scale 3 rail tracks.

Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails.

Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails.

For G and 1 Scale (45 mm / 1.772") tracks. Lay meters of ballast in just a few minutes! Perfect ballast spreading is never problem again with this easy to use tool. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails. Works perfect on straights and curves. You can use on all G and 1 scale tracks. 

Access all areas of your Loco with this new mechanical loco cradle. Adjustable for the length of your loco. Holds and rotates your model with ease. Unique rubber beds keep the loco held in the bench without damage.

Specifications: Board Size: 220 X 163 mm Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades. Cutting height: Up to 8 mm depending on the width and hardness of timber or profile. Cutting width: Up to 30 mm depending of the height and hardness of timber or profile. Materials to cut: Soft woods, styrene,...

Specifications: Overall size: 225 X 165 X 65m Power adapter input voltage: 100/240 V Power adapter output voltage: 18-20V DC, 3A Cutting disk size: 38mm Cutting height: 5mm Materials to cut: Model train tracks, non-ferrous soft metals. <p...

Check not just if your track has power - but also how much! <br...

For all analog or digital locomotives. Includes 6 rollers and 4 cleaners. Suitable for Marklin 3-Rail, analog and digital locomotives.

For all analog or digital locomotives running on 3-Rail, Marklin tracks.

This rolling road features an additional HO (3-Rail) aluminum track which can help support steam locomotive tenders while in the road unit. With protective buffers at each end the rolling road is suitable for all HO and OO scale models and can acommodate locomotives up to 500mm long. Included are 6 indiviual rollers in conjuction with 4 cleaning units, giving you complete...

For O Scale (32 mm / 1 1/4") Track Gauges and 2 Rail Tracks Lay meters of ballast in just a few minutes! Perfect ballast spreading is never problem again with this easy to use tool. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails. Works perfect on straights and curves. You can use on 2 rail tracks such as Atlas, Peco and many...

Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line,  spreads the ballast on track and never on rails.

This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin C-Tracks. One set includes 2 Parallel Track Tools.

This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin K-Tracks. One set includes 2 Parallel Track Tools.

For all HO and OO tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks in perfect parallel with ease.

Pushed or pulled by a locomotive. (DCC) Drop frequency electronically adjusted. Meters of glue applied in seconds. Drops glue only on ballast and sleepers thus you don’t need to clean the rails after gluing.

Our classic ballast spreader with a shut off mechanism added.

Ballast Gluer is another innovative tool from Proses workshops to glue track ballast with ease and quickly..

Adjustable height setting allows you to alter the depth of ballast  and cope with different Code Rail.   Shut off valve - now you can halt the flow of ballast whilst you lift the Ballast Spreader over point work or when it reaches the end of the track.   Loco hauled - You can now pull the Ballast Spreader with a locomotive as well as by hand.

Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line,  spreads the ballast on track and never on rails.