$27.21Price
Slot Car Tools & Accessories
1:32 scale single sided lamp posts for slot car layouts.
12-16 V, 0.5-1 Amps power supply required.
Height: 27 cm
$27.21Price
Subcategory
54 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Slot Car Tools & Accessories
1:32 scale laser-cut kit.
Illuminated and with a rotating banner sign.
12-16 V, 0.5-1 Amps power supply required for light.
1 X 1.5V AA battery required for rotating banner mechanism.
AA battery rotates the banner for about a year or more.
$34.83Price
Slot Car Tools & Accessories
1:32 scale laser-cut kit.
Pitstop for 2 cars, sliding doors.
Illuminated indoors.
12-16 V, 1 Amps power supply required.
$45.72Price
$19.59Price
Slot Car Tools & Accessories
1:32 scale laser-cut kit.
$19.59Price
$78.38Price
Slot Car Tools & Accessories
1:32 scale Stand with Lights.
Laser-cut acrylic kit with 36 high illuminance LEDs.
Requires power supply 12-16v AC or DC.
$78.38Price
$42.45Price
Slot Car Tools & Accessories
1:32 Slot Car Light Tower Laser-Cut MDF Kit with 24 high illuminance LED's.
Requires power supply 12-16v AC or DC.
$42.45Price
Slot Car Tools & Accessories
Precision Laser-Cut illuminated billboard.
Supply voltage: 12-16V AC or DC.
$23.95Price
$38.10Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
$38.10Price
$59.87Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
$59.87Price
$25.04Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
$25.04Price
$21.77Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
$21.77Price
$26.13Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
$26.13Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
$20.68Price
$17.42Price
Slot Car Tools & Accessories
Voltage tester for Slot tracks, both at 1:43, 1:32 and 1:24 scale.
This Proses tester, based on those used by the brand in its range of railways models accessories, not only allows to check if there is voltage on the track if not how much.
Led indicators light up for 5 to 9V, 9 to 12V and +12V.
It's design allows the use in most marketed...
$17.42Price
Slot Car Tools & Accessories
Spare felts, coarse and fine sand papers for TC-401/TC-401X Tyre Truers.
$8.16Price
$103.41Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
$103.41Price
$103.41Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
$103.41Price
$103.41Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
$103.41Price
$103.41Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
$103.41Price
Tools For Modelers
A set of paired magnetic set squares.
Simply pull apart, place inside and outside your 90 degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry.
After curing of the adhesive do remove easily the Snap...
$40.28Price
$76.20Price
Cradles, Testers, Rollers
Access all areas of your Loco with this new mechanical loco cradle. Adjustable for the length of your loco. Holds and rotates your model with ease. Unique rubber beds keep the loco held in the bench without damage.
$76.20Price
$59.87Price
Cradles, Testers, Rollers
Specifications:
Board Size: 220 X 163 mm
Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades.
Cutting height: Up to 8 mm depending on the width and hardness of timber or profile.
Cutting width: Up to 30 mm depending of the height and hardness of timber or profile.
Materials to cut: Soft woods, styrene,...
$59.87Price
$107.77Price
Cradles, Testers, Rollers
Specifications:
Overall size: 225 X 165 X 65m
Power adapter input voltage: 100/240 V
Power adapter output voltage: 18-20V DC, 3A
Cutting disk size: 38mm
Cutting height: 5mm
Materials to cut: Model train tracks, non-ferrous soft metals.
<p...
$107.77Price
Cradles, Testers, Rollers
Check not just if your track has power - but also how much! <br...
$17.42Price