CHF91.08Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
CHF91.08Price
Subcategory
82 products
Grid
Grid-2
List
List-2
Catelog
Active filters
CHF1.92Price
Cradles, Testers, Rollers
5 spare felts for Proses Track Cleaner
Proses Track Cleaner is a simple yet easy and efficient hand tool for keeping your track rails clean and helps improve the pickup around the layout.
CHF1.92Price
CHF6.71Price
Cradles, Testers, Rollers
Proses track cleaner with 2 additional spare felts.
Simple and easy hand tool for keeping your track rails clean and helps improve the pickup around the layout.
CHF6.71Price
CHF43.14Price
Tools For Modelers
2 paires of right angle magnetic clamps and 2 pairs of magnetic clamps with adjustable angles.
Simply pull apart, place inside and outside your corners and snap into place.
The snap and glue pairs hold the two pieces of plastic, wood, etc. in place and allow you to glue them at the desired angle without further worry.
<p...
CHF43.14Price
CHF25.89Price
Tools For Modelers
A set of paired magnetic clamps with adjustable angles.
Simply pull apart, place inside and outside your corners and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the desired angle without further worry.
After curing of the adhesive do remove easily...
CHF25.89Price
CHF16.30Price
Tools For Modelers
Proses hold and glue right angle holders for kit buildings and modellers.
Pack contains 2 holders, simply pull apart, place inside and outside your 90 degree corner and fix the wing nuts.
CHF16.30Price
CHF23.01Price
Tools For Modelers
A set of paired magnetic set squares.
Simply pull apart, place inside and outside your 90 degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry.
After curing of the adhesive do remove easily the Snap...
CHF23.01Price
CHF35.47Price
Tools For Modelers
A set of paired magnetic set squares.
Simply pull apart, place inside and outside your 90 degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry.
After curing of the adhesive do remove easily the Snap...
CHF35.47Price
CHF23.97Price
Ballasting Solutions
For O Scale (32 mm / 1 1/4") Track Gauges and 3 Rail Tracks Lay meters of ballast in just a few minutes! Perfect ballast spreading is never problem again with this easy to use tool.
Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails. Works perfect on straights and curves. You can use on all O scale 3 rail tracks.
CHF23.97Price
CHF14.38Price
Ballasting Solutions
Perfect ballast spreading is never problem again with this easy to use Ballast Spreader.
Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails.
CHF14.38Price
CHF14.38Price
Ballasting Solutions
Perfect ballast spreading is never problem again with this easy to use Ballast Spreader.
Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails.
CHF14.38Price
CHF33.56Price
Ballasting Solutions
For G and 1 Scale (45 mm / 1.772") tracks. Lay meters of ballast in just a few minutes! Perfect ballast spreading is never problem again with this easy to use tool.
Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails. Works perfect on straights and curves. You can use on all G and 1 scale tracks.
CHF33.56Price
CHF29.72CHF59.44Regular price-50% offPrice
Cradles, Testers, Rollers
Service your loco simply and easy with this new loco cradle.
<span...
CHF29.72CHF59.44Regular price-50% offPrice
CHF67.11Price
Cradles, Testers, Rollers
Access all areas of your Loco with this new mechanical loco cradle. Adjustable for the length of your loco. Holds and rotates your model with ease. Unique rubber beds keep the loco held in the bench without damage.
CHF67.11Price
CHF52.73Price
Cradles, Testers, Rollers
Specifications:
Board Size: 220 X 163 mm
Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades.
Cutting height: Up to 8 mm depending on the width and hardness of timber or profile.
Cutting width: Up to 30 mm depending of the height and hardness of timber or profile.
Materials to cut: Soft woods, styrene,...
CHF52.73Price
CHF94.92Price
Cradles, Testers, Rollers
Specifications:
Overall size: 225 X 165 X 65m
Power adapter input voltage: 100/240 V
Power adapter output voltage: 18-20V DC, 3A
Cutting disk size: 38mm
Cutting height: 5mm
Materials to cut: Model train tracks, non-ferrous soft metals.
<p...
CHF94.92Price
CHF91.08Price
Cradles, Testers, Rollers
For all G scale analog and digital locomotives.
Includes 6 rollers and 4 cleaners.
CHF91.08Price
CHF62.32Price
Cradles, Testers, Rollers
For all G scale analog and digital locomotives.
Includes 4 rollers and 4 cleaners.
CHF62.32Price
CHF91.08Price
Cradles, Testers, Rollers
For all 2-Rail O scale analog and digital locomotives.
Includes 6 rollers and 4 cleaners.
CHF91.08Price
CHF62.32Price
Cradles, Testers, Rollers
For all O 2-Rail scale analog and digital locomotives.
Includes 4 rollers and cleaners.
CHF62.32Price
Cradles, Testers, Rollers
For all analog or digital locomotives.
Includes 6 rollers and 4 cleaners.
Suitable for Marklin 3-Rail, analog and digital locomotives.
CHF91.08Price
CHF91.08Price
Cradles, Testers, Rollers
For all analog or digital locomotives.
Includes 6 rollers and 4 cleaners.
CHF91.08Price
Cradles, Testers, Rollers
For all analog or digital locomotives running on 3-Rail, Marklin tracks.
CHF62.32Price
CHF62.32Price
Cradles, Testers, Rollers
For all analog or digital locomotives.
CHF62.32Price