Cradles, Testers, Rollers
For all analog or digital locomotives.
Includes 6 rollers and 4 cleaners.
€95.00Price
Subcategory
151 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Cradles, Testers, Rollers
For all analog or digital locomotives running on 3-Rail, Marklin tracks.
€65.00Price
Cradles, Testers, Rollers
For all analog or digital locomotives.
€65.00Price
Cradles, Testers, Rollers
This rolling road features an additional HO (3-Rail) aluminum track which can help support steam locomotive tenders while in the road unit.
With protective buffers at each end the rolling road is suitable for all HO and OO scale models and can acommodate locomotives up to 500mm long.
Included are 6 indiviual rollers in conjuction with 4 cleaning units, giving you complete...
€145.00Price
€145.00Price
Cradles, Testers, Rollers
This rolling road features a 16.5mm gauge aluminum track which can help support steam locomotive tenders while in the road unit.
With protective buffers at each end the rolling road is suitable for all HO and OO scale models and can acommodate locomotives up to 500mm long.
Included are 6 indiviual rollers in conjuction with 4 cleaning units, giving you complete control of your...
€145.00Price
€21.00Price
Track Laying Tools
Flexible track is very useful but its tendency to straighten up makes track laying difficult unless it can be held in position. This new Flexible Track Holding Tool keeps your flexible track in the desired curve temporarily before fixing it permanently. You can even hold the track in your hands, off the baseboard, without it losing its curves! Suitable for Peco, Hornby, Jouef, Mehano,...
€21.00Price
€23.00Price
Track Laying Tools
This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin C-Tracks. One set includes 2 Parallel Track Tools.
€23.00Price
€23.00Price
Track Laying Tools
This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin K-Tracks. One set includes 2 Parallel Track Tools.
€23.00Price
€14.00Price
Track Laying Tools
Parallel Track Tool (67mm) is designed to keep the same distance between the centres of adjacent and parallel tracks of Hornby, Peco, Branchline and most UK geometry tracks.
With Parallel Track Tool you can lay your straight and curved tracks (first, second, third and fourth radius) in perfect parallel very easily.
One set includes 4 tools.
€14.00Price
€20.00Price
Track Laying Tools
For all HO and OO tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks in perfect parallel with ease.
€20.00Price
€16.00Price
Cradles, Testers, Rollers
Check not just if your track has power - but also how much! <br...
€16.00Price
Tools For Modelers
A set of 4 pcs large scale magnetic set squares.
Simply pull apart, place inside and outside your 90-degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry.
After curing of the adhesive do remove easily...
€55.00Price
€48.00Price
Ballasting Solutions
Pushed or pulled by a locomotive. (DCC)
Drop frequency electronically adjusted.
Meters of glue applied in seconds.
Drops glue only on ballast and sleepers thus you don’t need to clean the rails after gluing.
€48.00Price
€45.00Price
Tools For Modelers
2 paires of right angle magnetic clamps and 2 pairs of magnetic clamps with adjustable angles.
Simply pull apart, place inside and outside your corners and snap into place.
The snap and glue pairs hold the two pieces of plastic, wood, etc. in place and allow you to glue them at the desired angle without further worry.
<p...
€45.00Price
€24.00Price
Our classic ballast spreader with a shut off mechanism added.
€24.00Price
€55.00Price
Cradles, Testers, Rollers
Specifications:
Board Size: 220 X 163 mm
Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades.
Cutting height: Up to 8 mm depending on the width and hardness of timber or profile.
Cutting width: Up to 30 mm depending of the height and hardness of timber or profile.
Materials to cut: Soft woods, styrene,...
€55.00Price
€30.00Price
Ballast Gluer is another innovative tool from Proses workshops to glue track ballast with ease and quickly..
€30.00Price
€99.00Price
Cradles, Testers, Rollers
Specifications:
Overall size: 225 X 165 X 65m
Power adapter input voltage: 100/240 V
Power adapter output voltage: 18-20V DC, 3A
Cutting disk size: 38mm
Cutting height: 5mm
Materials to cut: Model train tracks, non-ferrous soft metals.
<p...
€99.00Price
€40.00Price
Adjustable height setting allows you to alter the depth of ballast and cope with different Code Rail. Shut off valve - now you can halt the flow of ballast whilst you lift the Ballast Spreader over point work or when it reaches the end of the track. Loco hauled - You can now pull the Ballast Spreader with a locomotive as well as by hand.
€40.00Price
Buffer Stops
Fits HO/OO scale tracks without ballast such as Atlas,...
€69.00Price
€69.00Price
Buffer Stops
Pack of 6 pcs of BF-HO-01 HO/OO Buffer Stop w/Light.
<p...
€69.00Price
Buffer Stops
Fits to all HO/OO scale tracks.
<p...
€8.50Price
Buffer Stops
Fits to all HO/OO scale tracks.
<p...
€8.50Price
- Pack
- Pack
Laser Cut Kits, Buildings
7 Pack Special Set of 7 different HO/OO scale wagon loads at a discounted price.
€74.00Price