CHF62.32Price
Cradles, Testers, Rollers
For all analog or digital locomotives.
CHF62.32Price
Subcategory
151 products
Grid
Grid-2
List
List-2
Catelog
Active filters
CHF139.02Price
Cradles, Testers, Rollers
This rolling road features an additional HO (3-Rail) aluminum track which can help support steam locomotive tenders while in the road unit.
With protective buffers at each end the rolling road is suitable for all HO and OO scale models and can acommodate locomotives up to 500mm long.
Included are 6 indiviual rollers in conjuction with 4 cleaning units, giving you complete...
CHF139.02Price
CHF139.02Price
Cradles, Testers, Rollers
This rolling road features a 16.5mm gauge aluminum track which can help support steam locomotive tenders while in the road unit.
With protective buffers at each end the rolling road is suitable for all HO and OO scale models and can acommodate locomotives up to 500mm long.
Included are 6 indiviual rollers in conjuction with 4 cleaning units, giving you complete control of your...
CHF139.02Price
CHF20.13Price
Track Laying Tools
Flexible track is very useful but its tendency to straighten up makes track laying difficult unless it can be held in position. This new Flexible Track Holding Tool keeps your flexible track in the desired curve temporarily before fixing it permanently. You can even hold the track in your hands, off the baseboard, without it losing its curves! Suitable for Peco, Hornby, Jouef, Mehano,...
CHF20.13Price
CHF22.05Price
Track Laying Tools
This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin C-Tracks. One set includes 2 Parallel Track Tools.
CHF22.05Price
CHF22.05Price
Track Laying Tools
This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin K-Tracks. One set includes 2 Parallel Track Tools.
CHF22.05Price
CHF13.42Price
Track Laying Tools
Parallel Track Tool (67mm) is designed to keep the same distance between the centres of adjacent and parallel tracks of Hornby, Peco, Branchline and most UK geometry tracks.
With Parallel Track Tool you can lay your straight and curved tracks (first, second, third and fourth radius) in perfect parallel very easily.
One set includes 4 tools.
CHF13.42Price
CHF19.18Price
Track Laying Tools
For all HO and OO tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks in perfect parallel with ease.
CHF19.18Price
CHF15.34Price
Cradles, Testers, Rollers
Check not just if your track has power - but also how much! <br...
CHF15.34Price
CHF12.94Price
Buffer Stops
Fits to HO/OO scale tracks without ballast such as Atlas, Hornby, Peco, Lima, etc.
Nickel silver track with a fishplate underneath the buffer stop is directly wired to LED light.
CHF12.94Price
CHF12.94Price
CHF12.94Price
Buffer Stops
Fits to HO/OO scale tracks without ballast such as Atlas, Hornby,...
CHF12.94Price
CHF12.94Price
Buffer Stops
Fits to HO/OO scale tracks without ballast such as Atlas, Hornby,...
CHF12.94Price
Tools For Modelers
A set of 4 pcs large scale magnetic set squares.
Simply pull apart, place inside and outside your 90-degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry.
After curing of the adhesive do remove easily...
CHF52.73Price
CHF46.02Price
Ballasting Solutions
Pushed or pulled by a locomotive. (DCC)
Drop frequency electronically adjusted.
Meters of glue applied in seconds.
Drops glue only on ballast and sleepers thus you don’t need to clean the rails after gluing.
CHF46.02Price
CHF43.14Price
Tools For Modelers
2 paires of right angle magnetic clamps and 2 pairs of magnetic clamps with adjustable angles.
Simply pull apart, place inside and outside your corners and snap into place.
The snap and glue pairs hold the two pieces of plastic, wood, etc. in place and allow you to glue them at the desired angle without further worry.
<p...
CHF43.14Price
CHF23.01Price
Our classic ballast spreader with a shut off mechanism added.
CHF23.01Price
CHF52.73Price
Cradles, Testers, Rollers
Specifications:
Board Size: 220 X 163 mm
Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades.
Cutting height: Up to 8 mm depending on the width and hardness of timber or profile.
Cutting width: Up to 30 mm depending of the height and hardness of timber or profile.
Materials to cut: Soft woods, styrene,...
CHF52.73Price
CHF28.76Price
Ballast Gluer is another innovative tool from Proses workshops to glue track ballast with ease and quickly..
CHF28.76Price
CHF94.92Price
Cradles, Testers, Rollers
Specifications:
Overall size: 225 X 165 X 65m
Power adapter input voltage: 100/240 V
Power adapter output voltage: 18-20V DC, 3A
Cutting disk size: 38mm
Cutting height: 5mm
Materials to cut: Model train tracks, non-ferrous soft metals.
<p...
CHF94.92Price
CHF38.35Price
Adjustable height setting allows you to alter the depth of ballast and cope with different Code Rail. Shut off valve - now you can halt the flow of ballast whilst you lift the Ballast Spreader over point work or when it reaches the end of the track. Loco hauled - You can now pull the Ballast Spreader with a locomotive as well as by hand.
CHF38.35Price
CHF33.56Price
Laser Cut Kits, Buildings
3D Embossed Cobblestone Road Set
N scale, 1.5 meters, 4.92 ft.)
Embossed printed on 1 mm thick foam PVC...
CHF33.56Price
CHF33.56Price
Laser Cut Kits, Buildings
3D Embossed Cobblestone Road Set
N scale, 1.6 meters, 5.25 ft.
Embossed printed on 1 mm thick foam PVC. ...
CHF33.56Price
CHF56.57Price
- Pack
- Pack
Gifts For Railroaders
Railroaders Clock and Name Plate.
Two items pack.
This pack ships free.
CHF56.57Price