Service your loco simply and easy with this new loco cradle. <span...

Access all areas of your Loco with this new mechanical loco cradle. Adjustable for the length of your loco. Holds and rotates your model with ease. Unique rubber beds keep the loco held in the bench without damage.

Specifications: Board Size: 220 X 163 mm Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades. Cutting height: Up to 8 mm depending on the width and hardness of timber or profile. Cutting width: Up to 30 mm depending of the height and hardness of timber or profile. Materials to cut: Soft woods, styrene,...

Specifications: Overall size: 225 X 165 X 65m Power adapter input voltage: 100/240 V Power adapter output voltage: 18-20V DC, 3A Cutting disk size: 38mm Cutting height: 5mm Materials to cut: Model train tracks, non-ferrous soft metals. <p...

Check not just if your track has power - but also how much! <br...

For O Scale (32 mm / 1 1/4") Track Gauges and 2 Rail Tracks Lay meters of ballast in just a few minutes! Perfect ballast spreading is never problem again with this easy to use tool. Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails. Works perfect on straights and curves. You can use on 2 rail tracks such as Atlas, Peco and many...

Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line,  spreads the ballast on track and never on rails.

Flexible track is very useful but its tendency to straighten up makes track laying difficult unless it can be held in position. This new Flexible Track Holding Tool keeps your flexible track in the desired curve temporarily before fixing it permanently. You can even hold the track in your hands, off the baseboard, without it losing its curves! Suitable for all TT scale tracks. Can be used...

Flexible track is very useful but its tendency to straighten up makes track laying difficult unless it can be held in position. This new Flexible Track Holding Tool keeps your flexible track in the desired curve temporarily before fixing it permanently. You can even hold the track in your hands, off the baseboard, without it losing its curves! Suitable for all N scale tracks. Can be used...

Flexible track is very useful but its tendency to straighten up makes track laying difficult unless it can be held in position.  This new Flexible Track Holding Tool keeps your flexible track in the desired curve temporarily before fixing it permanently.  You can even hold the track in your hands, off the baseboard, without it losing its curves!  Suitable for Peco, Hornby, Jouef, Mehano,...

For all TT scale tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks in perfect parallel with ease.

For all N scale tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks in perfect parallel with ease.

This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin C-Tracks. One set includes 2 Parallel Track Tools.

This very useful track alignment tool is designed to keep the same distance between the centres of adjacent and parallel tracks of Marklin K-Tracks. One set includes 2 Parallel Track Tools.

Parallel Track Tool (67mm) is designed to keep the same distance between the centres of adjacent and parallel tracks of Hornby, Peco, Branchline and most UK geometry tracks. With Parallel Track Tool you can lay your straight and curved tracks (first, second, third and fourth radius) in perfect parallel very easily. One set includes 4 tools.

For all HO and OO tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks in perfect parallel with ease.

Check not just if your track has power - but also how much! <br...

Fits to HO/OO scale tracks without ballast such as Atlas, Hornby, Peco, Lima, etc. Nickel silver track with a fishplate underneath the buffer stop is directly wired to LED light.

<span...

Fits to HO/OO scale tracks without ballast such as Atlas, Hornby,...

Pushed or pulled by a locomotive. (DCC) Drop frequency electronically adjusted. Meters of glue applied in seconds. Drops glue only on ballast and sleepers thus you don’t need to clean the rails after gluing.

Our classic ballast spreader with a shut off mechanism added.

Ballast Gluer is another innovative tool from Proses workshops to glue track ballast with ease and quickly..

Adjustable height setting allows you to alter the depth of ballast  and cope with different Code Rail.   Shut off valve - now you can halt the flow of ballast whilst you lift the Ballast Spreader over point work or when it reaches the end of the track.   Loco hauled - You can now pull the Ballast Spreader with a locomotive as well as by hand.