CHF15.34Price
Slot Car Tools & Accessories
Laser-cut kir for 1:32 slot car layouts.
CHF15.34Price
Subcategory
167 products
Grid
Grid-2
List
List-2
Catelog
Active filters
CHF15.34Price
Slot Car Tools & Accessories
Laser-cut kir for 1:32 slot car layouts.
CHF15.34Price
CHF26.85Price
Slot Car Tools & Accessories
This kit is ideal for 1:32 and smaller scale tracks.
Laser-Cut Acrylic Kit with 9 high illuminance LED's.
Connects to a 12-16v AC or DC power supply.
LED panel is already assembled and wired.
Height: 20 cm.
CHF26.85Price
CHF28.76Price
Slot Car Tools & Accessories
1:32 scale double sided lamp posts for slot car layouts.
12-16 V, 0.5-1 Amps power supply required.
Height: 27 cm
CHF28.76Price
CHF23.97Price
Slot Car Tools & Accessories
1:32 scale single sided lamp posts for slot car layouts.
12-16 V, 0.5-1 Amps power supply required.
Height: 27 cm
CHF23.97Price
CHF30.68Price
Slot Car Tools & Accessories
1:32 scale laser-cut kit.
Illuminated and with a rotating banner sign.
12-16 V, 0.5-1 Amps power supply required for light.
1 X 1.5V AA battery required for rotating banner mechanism.
AA battery rotates the banner for about a year or more.
CHF30.68Price
Slot Car Tools & Accessories
1:32 scale laser-cut kit.
Pitstop for 2 cars, sliding doors.
Illuminated indoors.
12-16 V, 1 Amps power supply required.
CHF40.27Price
CHF17.26Price
Slot Car Tools & Accessories
1:32 scale laser-cut kit.
CHF17.26Price
CHF69.03Price
Slot Car Tools & Accessories
1:32 scale Stand with Lights.
Laser-cut acrylic kit with 36 high illuminance LEDs.
Requires power supply 12-16v AC or DC.
CHF69.03Price
CHF37.39Price
Slot Car Tools & Accessories
1:32 Slot Car Light Tower Laser-Cut MDF Kit with 24 high illuminance LED's.
Requires power supply 12-16v AC or DC.
CHF37.39Price
CHF21.09Price
Slot Car Tools & Accessories
Precision Laser-Cut illuminated billboard.
Supply voltage: 12-16V AC or DC.
CHF21.09Price
CHF33.56Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
CHF33.56Price
CHF52.73Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
CHF52.73Price
CHF22.05Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
CHF22.05Price
CHF19.18Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
CHF19.18Price
CHF23.01Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
CHF23.01Price
CHF18.22Price
Slot Car Tools & Accessories
Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks.
All parts are pre-cut and easy to assemble in half an hour.
CHF18.22Price
CHF15.34Price
Slot Car Tools & Accessories
Voltage tester for Slot tracks, both at 1:43, 1:32 and 1:24 scale.
This Proses tester, based on those used by the brand in its range of railways models accessories, not only allows to check if there is voltage on the track if not how much.
Led indicators light up for 5 to 9V, 9 to 12V and +12V.
It's design allows the use in most marketed...
CHF15.34Price
CHF7.19Price
Slot Car Tools & Accessories
Spare felts, coarse and fine sand papers for TC-401/TC-401X Tyre Truers.
CHF7.19Price
CHF35.47Price
Tools For Modelers
A set of paired magnetic set squares.
Simply pull apart, place inside and outside your 90 degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry.
After curing of the adhesive do remove easily the Snap...
CHF35.47Price
CHF52.73Price
Cradles, Testers, Rollers
Specifications:
Board Size: 220 X 163 mm
Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades.
Cutting height: Up to 8 mm depending on the width and hardness of timber or profile.
Cutting width: Up to 30 mm depending of the height and hardness of timber or profile.
Materials to cut: Soft woods, styrene,...
CHF52.73Price
CHF94.92Price
Cradles, Testers, Rollers
Specifications:
Overall size: 225 X 165 X 65m
Power adapter input voltage: 100/240 V
Power adapter output voltage: 18-20V DC, 3A
Cutting disk size: 38mm
Cutting height: 5mm
Materials to cut: Model train tracks, non-ferrous soft metals.
<p...
CHF94.92Price
CHF14.38Price
Perfect ballast spreading is never problem again with this easy to use Ballast Spreader.
Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails.
CHF14.38Price