Parallel Track Tool (67mm) is designed to keep the same distance between the centres of adjacent and parallel tracks of Hornby, Peco, Branchline and most UK geometry tracks. With Parallel Track Tool you can lay your straight and curved tracks (first, second, third and fourth radius) in perfect parallel very easily. One set includes 4 tools.

For all HO and OO tracks. One set includes 2 Tools. This very useful track alignment tool is designed to keep the same distance between the centers of adjacent and parallel tracks. You can adjust the distance between the mids of tracks from 30 mm to 90 mm or from 1.2 inch to 3.5 inches. With Parallel Track Tool you can lay your straight and curved tracks in perfect parallel with ease.

Check not just if your track has power - but also how much! <br...

Fits to HO/OO scale tracks without ballast such as Atlas, Hornby, Peco, Lima, etc. Nickel silver track with a fishplate underneath the buffer stop is directly wired to LED light.

<span...

Fits to HO/OO scale tracks without ballast such as Atlas, Hornby,...

Pushed or pulled by a locomotive. (DCC) Drop frequency electronically adjusted. Meters of glue applied in seconds. Drops glue only on ballast and sleepers thus you don’t need to clean the rails after gluing.

A set of 4 pcs large scale magnetic set squares. Simply pull apart, place inside and outside your 90-degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily...

Our classic ballast spreader with a shut off mechanism added.

2 paires of right angle magnetic clamps and 2 pairs of magnetic clamps with adjustable angles. Simply pull apart, place inside and outside your corners and snap into place. The snap and glue pairs hold the two pieces of plastic, wood, etc. in place and allow you to glue them at the desired angle without further worry. <p...

Ballast Gluer is another innovative tool from Proses workshops to glue track ballast with ease and quickly..

Specifications: Board Size: 220 X 163 mm Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades. Cutting height: Up to 8 mm depending on the width and hardness of timber or profile. Cutting width: Up to 30 mm depending of the height and hardness of timber or profile. Materials to cut: Soft woods, styrene,...

Adjustable height setting allows you to alter the depth of ballast  and cope with different Code Rail.   Shut off valve - now you can halt the flow of ballast whilst you lift the Ballast Spreader over point work or when it reaches the end of the track.   Loco hauled - You can now pull the Ballast Spreader with a locomotive as well as by hand.

Specifications: Overall size: 225 X 165 X 65m Power adapter input voltage: 100/240 V Power adapter output voltage: 18-20V DC, 3A Cutting disk size: 38mm Cutting height: 5mm Materials to cut: Model train tracks, non-ferrous soft metals. <p...

Perfect ballast spreading is never problem again with this easy to use Ballast Spreader. Slots underneath the spreader keeps your ballast in line,  spreads the ballast on track and never on rails.