€13.50Price
Buffer Stops
Fits to HO/OO scale tracks without ballast such as Atlas, Hornby, Peco, Lima, etc.
Nickel silver track with a fishplate underneath the buffer stop is directly wired to LED light.
€13.50Price
Subcategory
189 products
Grid
Grid-2
List
List-2
Catelog
Active filters
€13.50Price
€13.50Price
Buffer Stops
Fits to HO/OO scale tracks without ballast such as Atlas, Hornby,...
€13.50Price
€48.00Price
Ballasting Solutions
Pushed or pulled by a locomotive. (DCC)
Drop frequency electronically adjusted.
Meters of glue applied in seconds.
Drops glue only on ballast and sleepers thus you don’t need to clean the rails after gluing.
€48.00Price
Tools For Modelers
A set of 4 pcs large scale magnetic set squares.
Simply pull apart, place inside and outside your 90-degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry.
After curing of the adhesive do remove easily...
€55.00Price
€24.00Price
Our classic ballast spreader with a shut off mechanism added.
€24.00Price
€45.00Price
Tools For Modelers
2 paires of right angle magnetic clamps and 2 pairs of magnetic clamps with adjustable angles.
Simply pull apart, place inside and outside your corners and snap into place.
The snap and glue pairs hold the two pieces of plastic, wood, etc. in place and allow you to glue them at the desired angle without further worry.
<p...
€45.00Price
€30.00Price
Ballast Gluer is another innovative tool from Proses workshops to glue track ballast with ease and quickly..
€30.00Price
€110.00Price
- New
- New
This pack includes three essential items for laying flexible N scale tracks:
2 pcs. Parallel Track Tools
2 pcs. Flexible Track Holders
18 + 4 pcs. Flexible Track Adjustment Set
€110.00Price
€55.00Price
Cradles, Testers, Rollers
Specifications:
Board Size: 220 X 163 mm
Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades.
Cutting height: Up to 8 mm depending on the width and hardness of timber or profile.
Cutting width: Up to 30 mm depending of the height and hardness of timber or profile.
Materials to cut: Soft woods, styrene,...
€55.00Price
€40.00Price
Adjustable height setting allows you to alter the depth of ballast and cope with different Code Rail. Shut off valve - now you can halt the flow of ballast whilst you lift the Ballast Spreader over point work or when it reaches the end of the track. Loco hauled - You can now pull the Ballast Spreader with a locomotive as well as by hand.
€40.00Price
€110.00Price
- New
- New
This pack includes three essential items for laying flexible N scale tracks:
2 pcs. Parallel Track Tools
2 pcs. Flexible Track Holders
18 + 4 pcs. Flexible Track Adjustment Set (adjusts from 17” to 35.2” radius, 15 and 30 degrees)
The set simplifies track laying, ensuring precision and ease. It...
€110.00Price
€99.00Price
Cradles, Testers, Rollers
Specifications:
Overall size: 225 X 165 X 65m
Power adapter input voltage: 100/240 V
Power adapter output voltage: 18-20V DC, 3A
Cutting disk size: 38mm
Cutting height: 5mm
Materials to cut: Model train tracks, non-ferrous soft metals.
<p...
€99.00Price
€15.00Price
Perfect ballast spreading is never problem again with this easy to use Ballast Spreader.
Slots underneath the spreader keeps your ballast in line, spreads the ballast on track and never on rails.
€15.00Price
€59.00Price
- Pack
- Pack
Gifts For Railroaders
Railroaders Clock and Name Plate.
Two items pack.
This pack ships free.
€59.00Price
€29.00Price
Your customized desktop name plate with your name, club name, road name, etc.
Height : 10 cm (4")
Ships in 3 days.
Please email your name or club name after purchase or add it on the comments section on check out pages.
€29.00Price
€35.00Price
Your customized wall clock with your name or club name.
Size: 17.5 cm X 18.5 cm (6.89" X 728")
Works with a 1.5V AA battery. (Not included)
Ships in 3 days.
Please email your name or club name after purchase or add it on the comments section on check out pages.
€35.00Price
€95.00Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
€95.00Price
€95.00Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
€95.00Price
€95.00Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
€95.00Price
€95.00Price
Ballasting Solutions
Pack includes below tools.
Ballast Spreader
Parallel Track Tools
Flexible Track Tool
Track Voltage Tester
Snap & Glue Magnetic Clamps
€95.00Price
€60.00Price
Track Laying Tools
Over 40 meters of HO/OO pre-cut foam beds for UK geometry tracks such as Hornby, Peco Setrack and Branchline.
A revolutionary, easy way to apply track beds to your layout.
All foam-beds are numbered similar to Hornby and Branchline codes. If you have a Hornby curve track R8261 or R8262, you need FB8261-2. If you have a Branchline 36-877 or 36-878 Express Point you...
€60.00Price
€15.00Price
Track Laying Tools
A revolutionary, easy way to apply track beds to your layout.
Pre-Cut HO/OO scale foam-beds for UK geometry tracks such as Hornby, Peco Setrack and Branchline.
All foam-beds are numbered similar to Hornby and Branchline codes. If you have a Hornby curve track R8261 or R8262, you need FB8261-2. If you have a Branchline 36-877 or 36-878 Express Point you need...
€15.00Price
€10.50Price
Track Laying Tools
A revolutionary, easy way to apply track beds to your layout.
Pre-Cut HO/OO scale foam-beds for UK geometry tracks such as Hornby, Peco Setrack and Branchline.
All foam-beds are numbered similar to Hornby and Branchline codes. If you have a Hornby curve track R8261 or R8262, you need FB8261-2. If you have a Branchline 36-877 or 36-878 Express Point you need...
€10.50Price