Suitable for O gauge, 2-rail, and 3-rail tracks and locomotives and can accommodate locomotives up to 35.4" (90 cm) long. Includes 6 rollers and 4 wheel cleaning accessories. Rollers and cleaners can also be placed on tracks as well as in the base unit. Good for all 2-rail/3-rail, analog, and digital locomotives. Additional roller sets can be purchased...

Precision laser-cut kit made of MDF. Easy to build, detailed kit with lights and motorized, rotating banner. Needs assembly and painting.

Precision laser-cut kit made of MDF. Easy to build, detailed kit with lights and motorized, rotating banner. Needs assembly and painting.

Double storey container offices. Precision laser-cut kit made of MDF, acrylic and plastic parts. Unbuilt kit, needs painting, unpainted. Dimensions in mm: L: 148mm, W: 103mm, H: 52mm Dimensions in inches: L: 5.82", W: "4.55, H: 2.05" Scale: O

Precision laser-cut kit made of MDF. Easy to build, detailed kit with lights and motorized, rotating banner.

A set of 2 pcs large scale magnetic set squares. Simply pull apart, place inside and outside your 90-degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily...

A set of 4 pcs large scale magnetic set squares. Simply pull apart, place inside and outside your 90-degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily...

Spares for TC-501 and TC-501 Tire Truer and Cleaner for 1:32 and 1:24 scale slot cars. Coarse and fine sandpapers and spare cleaning felts. (3 of each)

Precision laser-cut kit made of MDF including materials acrylic (Plexiglass), etc. Easy to build, very detailed kit with interior/exterior lights and motorized working doors. The main building is unassembled and unpainted. The motor mechanism comes built. The door opening/closing speed can be adjusted with a screwdriver as needed. The video shows our HO scale...

Another great tool to end your challenges to get your long, multi wheel locos on tracks with ease. The aluminum base is powered by the track it is placed on and lets the loco run and get on the track smoothly and properly. Both ends are open to giving access to both sides of the track. Base length: 97 cm Scale: O (3-rail) <table cellpadding="0" cellspacing="0"...

Your customized desktop name plate with your name, club name, road name, etc. Height : 10 cm (4")  Ships in 3 days. Please email your name or club name after purchase or add it on the comments section on check out pages.

Your customized wall clock with your name or club name. Size: 17.5 cm X 18.5 cm (6.89" X 728")  Works with a 1.5V AA battery. (Not included) Ships in 3 days. Please email your name or club name after purchase or add it on the comments section on check out pages.

Laser-cut kir for 1:32 slot car layouts.

Laser-cut kir for 1:32 slot car layouts.

Laser-cut kir for 1:32 slot car layouts.

Laser-cut kir for 1:32 slot car layouts.

This kit is ideal for 1:32 and smaller scale tracks. Laser-Cut Acrylic Kit with 9 high illuminance LED's. Connects to a 12-16v AC or DC power supply. LED panel is already assembled and wired. Height: 20 cm.

1:32 scale double sided lamp posts for slot car layouts. 12-16 V, 0.5-1 Amps power supply required. Height: 27 cm

1:32 scale single sided lamp posts for slot car layouts. 12-16 V, 0.5-1 Amps power supply required. Height: 27 cm

1:32 scale laser-cut kit. Illuminated and with a rotating banner sign. 12-16 V, 0.5-1 Amps power supply required for light. 1 X 1.5V AA battery required for rotating banner mechanism.  AA battery rotates the banner for about a year or more.

1:32 scale laser-cut kit. Pitstop for 2 cars, sliding doors. Illuminated indoors. 12-16 V, 1 Amps power supply required.

1:32 scale laser-cut kit.

1:32 scale Stand with Lights. Laser-cut acrylic kit with 36 high illuminance LEDs. Requires power supply 12-16v AC or DC.

1:32 Slot Car Light Tower Laser-Cut MDF Kit with 24 high illuminance LED's. Requires power supply 12-16v AC or DC.