A set of 4 pcs large scale magnetic set squares. Simply pull apart, place inside and outside your 90-degree corner and snap into place. The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry. After curing of the adhesive do remove easily...

2 paires of right angle magnetic clamps and 2 pairs of magnetic clamps with adjustable angles. Simply pull apart, place inside and outside your corners and snap into place. The snap and glue pairs hold the two pieces of plastic, wood, etc. in place and allow you to glue them at the desired angle without further worry. <p...

Specifications: Board Size: 220 X 163 mm Blades: 17-19 mm scored (snap-off, break-off) standard cutter blades. Cutting height: Up to 8 mm depending on the width and hardness of timber or profile. Cutting width: Up to 30 mm depending of the height and hardness of timber or profile. Materials to cut: Soft woods, styrene,...

Specifications: Overall size: 225 X 165 X 65m Power adapter input voltage: 100/240 V Power adapter output voltage: 18-20V DC, 3A Cutting disk size: 38mm Cutting height: 5mm Materials to cut: Model train tracks, non-ferrous soft metals. <p...

This pack includes, 1. Tyre Truer/Cleaner The unit picks power from your own track thus you can control the turning speed of the tyres with your own hand controller whether it’s an analog or a digital car.  Coarse and fine sandpapers and spare cleaning felts (3/each) are included.  <span...

Set includes 10 cleaning felts, 10 coarse and 10 fine sandpapers with adhesive backups to use with TC-501, TC-501P, and TC-602 Slot Car Tyre Truer and Cleaners. Note: Cars and truer on the pictures are used for demonstration purposes and not included.

Tire truer and cleaner for 1:32 and 1:24 scale slot cars. Coarse and fine sandpapers and spare cleaning felts are included. The unit picks power from your own track thus you can control the turning speed of the tires with your own hand controller whether it’s an analog or a digital car. <span...

Spares for TC-501 and TC-501 Tire Truer and Cleaner for 1:32 and 1:24 scale slot cars. Coarse and fine sandpapers and spare cleaning felts. (3 of each)

Laser-cut kir for 1:32 slot car layouts.

Laser-cut kir for 1:32 slot car layouts.

Laser-cut kir for 1:32 slot car layouts.

Laser-cut kir for 1:32 slot car layouts.

This kit is ideal for 1:32 and smaller scale tracks. Laser-Cut Acrylic Kit with 9 high illuminance LED's. Connects to a 12-16v AC or DC power supply. LED panel is already assembled and wired. Height: 20 cm.

1:32 scale double sided lamp posts for slot car layouts. 12-16 V, 0.5-1 Amps power supply required. Height: 27 cm

1:32 scale single sided lamp posts for slot car layouts. 12-16 V, 0.5-1 Amps power supply required. Height: 27 cm

1:32 scale laser-cut kit. Illuminated and with a rotating banner sign. 12-16 V, 0.5-1 Amps power supply required for light. 1 X 1.5V AA battery required for rotating banner mechanism.  AA battery rotates the banner for about a year or more.

1:32 scale laser-cut kit. Pitstop for 2 cars, sliding doors. Illuminated indoors. 12-16 V, 1 Amps power supply required.

1:32 scale laser-cut kit.

1:32 scale Stand with Lights. Laser-cut acrylic kit with 36 high illuminance LEDs. Requires power supply 12-16v AC or DC.

1:32 Slot Car Light Tower Laser-Cut MDF Kit with 24 high illuminance LED's. Requires power supply 12-16v AC or DC.

Precision Laser-Cut illuminated billboard. Supply voltage: 12-16V AC or DC.

Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks. All parts are pre-cut and easy to assemble in half an hour.

Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks. All parts are pre-cut and easy to assemble in half an hour.

Precision Laser-Cut Kit for 1:32 slot car layouts and race tracks. All parts are pre-cut and easy to assemble in half an hour.